MS 462 C-M Petrol Chainsaw

Standard features

• Decompression valve

  The decompression valve is part of the easy starting system. The valve should be pressed before starting to reduce the compression pressure when starting, as well as reducing the effort needed to pull the starter rope. The decompression valve is semi-automatic; it must be pressed manually before starting, but then closes automatically.

• STIHL M-Tronic (FT)

  This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed - even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.

• STIHL 2-MIX-Engine

  1-in-4 channel technology. The economical STIHL 2-MIX engine with 1-in-4channel technology features a high torque over a wide speed range. The chainsaw provides fuel savings of up to 20% compared to STIHL two-stroke engines in the same performance class without 2-MIX technology. Exhaust emissions are reduced by up to 50%.

• Anti-vibration system

  Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine's engine are dampened which significantly reduces vibrations at the handles.

• HD2 filter with radial seal

  The new HD2 air filter, made from PET material and featuring a radial seal, prevents the intake of fine dust particles. The hermetic seal increases the service life of the engine and reduces wear.

• Compensator

  This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.

• Captive nuts

  When changing the cutting attachment, you will not risk losing the nuts on the sprocket. The MS 261 is the first STIHL chainsaw to be equipped with the captive nuts. A great advantage for all users.

• Plunge guide

  Marking has been added to the fan housing to assist with plunge cuts. This ensures better directional control and safe use of the machine during plunge cutting.

• Optimised bumper spikes

  The tooth length of the bumper spikes has been adjusted to account for the radial contours of trees. The saw bites into wood even better when cutting lengths and felling.

• Side chain tensioner

  The tensioning screw can be found on the side of the chain saw through the sprocket cover. This removes the need for contact with the sharp saw chain.

• Tool free filler caps

  Special catches on the fuel and oil tanks for easy opening and locking without the need for tools.

• Stop button function

  After the machine is turned off, the control lever immediately moves back into the operating position. This allows a warm machine to be restarted again immediately.

• Optimised sprocket cover

  The flatter, narrower sprocket cover with integrated slide rails reduces effort when pruning and ensures outstanding chip removal.

• Low power to weight ratio

  The STIHL MS 462 C-M is the lightest professional chainsaw in its cubic capacity class. Special components, such as the cylinder with its angled cooling ribs, the compact sprocket cover, the light crankcase, the weight-optimised flywheel and the Rollomatic ES Light rail ensure that the machine is noticeably lighter.

• STIHL Ematic with new oil pump system

  The new oil pump system allows a higher volume of oil to be delivered. This is especially useful in dusty conditions or when using a long guide bar.

• User-friendly calibration function

  The calibration of the STIHL M-Tronic system has been optimised further. There is no need for any manual corrections, even in specialised areas of application, e.g. in high mountain ranges. Calibration is completed within approx. 72 seconds after the machine is started.

• MotoMix

  STIHL MotoMix is our patented premixed fuel, specially blended for ultimate performance. This 50:1 ready-mixed fuel is a combination of premium non-ethanol, high-octane motor fuel for all STIHL 2-stroke engines which gives you optimum performance, excellent cold start properties, maximum acceleration over the entire rpm range and perfect running characteristics even with a sudden rev change. With STIHL HP ultra premium oil for exceptional engine lubrication and extreme cleanliness, fully synthetic and biodegradable for optimal performance and long service life. User- and engine-friendly thanks to fewer emissions (free from ethanol; almost no olefins and aromatic compounds). Can be kept in storage for up to five years. Reliable top performance – STIHL 2-stroke engines and STIHL MotoMix are made for each other; all conceivable applications have been put through rigorous testing.

  Find out more about our MotoMix promotion here.

  
  

  Patent EP 2031043

  
  

  Octane number RON	>95
  Octane rating MOZ	93
  Aromatic content % Vol.	0.1
  Benzene content % Vol.	0.03
  Sulphur content mg/kg	3
  Shelf life Years	up to 5
  Density at 15°C kg/m3	690
  Olefin content % Vol.	0.1
  Vapour pressure at 40 °C kPA	61
  Two-stroke oil content % Vol.	1.8

  Versions	Price
  MotoMix 5 l	£20.00*	Save and compare
  Save and compare

• ForestPlus chain oil

  Based on high-quality mineral oils, ForestPlus is suitable for use with all chainsaws, including harvesters. ForestPlus delivers reliable chain lubrication and no resin build up, even during prolonged down times.

  Versions	Price
  ForestPlus chain oil - 5 l	£24.80*	Save and compare
  Save and compare

• HP Ultra 2-stroke engine oil

  Fully synthetic oil with exceptional lubrication properties. Burns with extremely low residue due to ash-free additive. Suitable for continuous use under the most demanding engine conditions. Performance class: JASO-FB, ISO-L-EGB. Fuel/oil ratio 50:1. Recommended for STIHL 4-MIX engines.

  Versions	Price
  HP Ultra 2-stroke oil - 1 l (for 50 l) metering bottle	£28.40*	Save and compare
  Save and compare

• Varioclean

  Water based, alkaline detergent specifically for dissolving and removing burnt-in resin and oil residue from your machine, and cleaning your tool’s housing, HD2 filter, wire mesh filter or PA filter. The detergent is biodegradable. Avoid contact with the eyes and keep out of reach of children.

  To use Varioclean, first wait for your machine to cool down. Then, spray it onto the surface of the part you are cleaning and leave it for a maximum of 5 minutes, so the cleaner is not allowed to dry. Then, wash it off with water and wipe with a cloth to dry. We recommend you wear safety glasses when doing this.

  Shelf life Years	3
  Biodegradable	Yes

  Versions	Price
  Varioclean - 500ml	£10.50*	Save and compare
  Save and compare

• MS 462 C-M VW Petrol Chainsaw Reliable and powerful 4.4 kW forestry chainsaw, fitted with electric carburettor heating and electrically heated handles
  >
• MS 462 C-M R Petrol Chainsaw High-powered chainsaw for emergency operations
  >