MS 201 TC-M Petrol Chainsaw

Standard features

• Fold-out hook

  The fold-out hook serves as a carrying rope attachment for lowering the arborist saw and for security. When it is pushed in, the hook doesn't get in the way of your work or when it's in storage.

• STIHL M-Tronic (M)

  This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed - even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.

• Advanced combustion technology

  Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range.

• Scabbard

  The scabbard snaps directly onto the sprocket so it's firmly attached and safely fixed onto the chainsaw. It also has two suspension eyelets that allow the arborist to secure the scabbard to his harness with a rope. The special scabbard covers the clamp end stop. This is to prevent injury and material damage.

• Anti-vibration system

  Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine's engine are dampened which significantly reduces vibrations at the handles.

• Compensator

  This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.

• Captive nuts

  When changing the cutting attachment, you will not risk losing the nuts on the sprocket.

• Variable-displacement oil pump

  Allows a precise, demand-based delivery of oil. It's possible to reduce oil production by up to 50% in the E position. For very long cutting attachments or very dry wood, an additional volume of oil can be added by the user. similar to illustration.

• Single-lever master control

  All important functions such as start, choke, throttle and stop are operated via a single lever.

• Side chain tensioner

  The tensioning screw can be found on the side of the chain saw through the sprocket cover. This removes the need for contact with the sharp saw chain.

• Ematic chain lubrication system

  The Ematic chain lubrication system ensures pinpoint lubrication of the saw chain links and guide bar rails. When used with STIHL Oilomatic saw chain, it will provide maximum lubrication, longer wear and less oil consumption than conventional methods of chain lubrication. The Ematic system can reduce bar oil consumption by up to 50%.

• STIHL ElastoStart

  STIHL ElastoStart reduces the shock caused by the compression of the engine during starting. The compression shock is taken away from the user's joints and muscles through a spring or rubber element in the starter handle.

• MotoMix

  STIHL MotoMix is our patented premixed fuel, specially blended for ultimate performance.

  This 50:1 ready-mixed fuel is a combination of premium non-ethanol, high-octane motor fuel for all STIHL 2-stroke engines which gives you optimum performance, excellent cold start properties, maximum acceleration over the entire rpm range and perfect running characteristics even with a sudden rev change.

  MotoMix uses STIHL HP ultra-premium oil for exceptional engine lubrication and extreme cleanliness. It’s fully synthetic and biodegradable for optimal performance and long service life. MotoMix is user- and engine-friendly thanks to fewer emissions (free from ethanol; almost no olefins and aromatic compounds).

  Can be kept in storage for up to five years.

  Did you know:

  • For MotoMix drums (55 l & 200 l), speak with your nearest STIHL Approved Dealer about direct delivery of the fuel to your preferred address. Find out more about our MotoMix promotion here.
  
  

  Patent EP 2031043

  
  

  Octane number RON	>95
  Octane rating MOZ	93
  Benzene content % Vol.	0.03
  Sulphur content mg/kg	3
  Shelf life Years	up to 5
  Density at 15°C kg/m3	690
  Olefin content % Vol.	0.1
  Vapour pressure at 40 °C kPA	61
  Two-stroke oil content % Vol.	1.8

  Versions	Price
  MotoMix 5 l	£21.99*	Save and compare
  Save and compare

• ForestPlus chain oil

  Based on high-quality mineral oils, ForestPlus is suitable for use with all chainsaws, including harvesters. ForestPlus delivers reliable chain lubrication and no resin build up, even during prolonged down times.

  Versions	Price
  ForestPlus chain oil - 5 l	£26.54*	Save and compare
  Save and compare

• HP Ultra 2-stroke engine oil

  Fully synthetic oil with exceptional lubrication properties. Burns with extremely low residue due to ash-free additive. Suitable for continuous use under the most demanding engine conditions. Performance class: JASO-FB, ISO-L-EGB. Fuel/oil ratio 50:1. Recommended for STIHL 4-MIX engines.

  Versions	Price
  HP Ultra 2-stroke oil - 1 l (for 50 l) metering bottle	£30.39*	Save and compare
  Save and compare

• Varioclean

  Water based, alkaline detergent specifically for dissolving and removing burnt-in resin and oil residue from your machine, and cleaning your tool’s housing, HD2 filter, wire mesh filter or PA filter. The detergent is biodegradable. Avoid contact with the eyes and keep out of reach of children.

  To use Varioclean, first wait for your machine to cool down. Then, spray it onto the surface of the part you are cleaning and leave it for a maximum of 5 minutes, so the cleaner is not allowed to dry. Then, wash it off with water and wipe with a cloth to dry. We recommend you wear safety glasses when doing this.

  Shelf life Years	3
  Biodegradable	Yes

  Versions	Price
  Varioclean - 500ml	£11.23*	Save and compare
  Save and compare

• MS 201 C-M Petrol Chainsaw Compact and powerful 1.8kW professional chainsaw
  >